40w 2x2ft 600X600 595x595 Dimming LED panel light with color
temperature and brightness dimmable
Features of CCT Dimmable LED Panel light
1.Variety control mode: Remote control, Panel Controller, Light Controller,Switch
2. Wireless remote control, distance more than 20 meters no meter
3. Segmented fast regulating, Stepless regulation slow
4. Scene mode, night light
5. Adjustable Dimmable light range between 3% and 100%
6. Open and close and the function of time switch
7. Ordinary switch can be segmented regulation
8. Light source: Original Import SMD LEDs
9.Long LED life: More than 50,000 hours
10.LED panel light Function: Color Temperature Dimmable
11. LED panel light type: External isolated constant current driver
12.LED panel light Power factor:>0.95 No UV or IR light
13.Eco-friendly,No mercury or other inorganics
14.Highest optical efficiency: 90-95 lumens per watt
15.Homogeneous flood illumination
16.Aluminum housing with excellent thermal efficiencies
17.The panel light is available in the following white color
18. High grade light guide panel to assure high lighting uniformity
19. 40w LED panel light can achieve directional light output equal
to traditional 80w grid lamp
Specifications of CCT Dimmable LED panel light:
|LED Qty||216pcs SMD2835|
|Beam Angle||140 °|
|Luminous Efficiency||95 lm/w|
|Input Voltage||AC85~265V 50/60Hz|
|LED panel light Size||595*595*9mm|
|Glaring Rate||UGR 19|
Remote Controller, Panel controller
|Installation Type||Recessed (or pendant mounted)|
Wireless remote and driver for color temperature and brightness
1. Energy Saving. Saving 65%-70% electricity cost to traditional
2. Advanced super longlife and stable driver.
3. Professional thermal management.
4. Instant on, no warm up time required.
5. No noise, no flickering.
6. No UV or IR radiation in the beam, mercury free.
7. Anti-shock, anti-moisture.
8. Aluminum alloy 6063 body and leading light transmitting Optical
9. Exquisite small appearance. Easy to install with mounting
10. Eco-friendly. No mercury and harmful materials
Distribution curve flux:
User Guide Note:
Pls read the entire manual to fully understand and safe usely use
The products anc be used at voltage of 100-277Vac,50/60Hz,suitable
for indoor dry environment.
Specifications are subject to change without notice.pls visit
www.LED-Panel-lights.com for the most recent user guide versions.
- Unpack and careful examine the product.
- Report any damage and save all packing material if any parts were
damaged during transportation
- Do not attempt to use this apparatus if it is damaged.
1) Pls remove the protection film on the front of luminaire
- Consult a qualified electrician to ensure correct branch circuit
- The products should be installed and operated by qualified
electrician or technician in accordance with relevant local codes.
- Rish of electric shock,ensure that main power source is off when
wiring or soldering the sections of the product.
- Prior to cleaning the product,make sure it has been disconnected
from power supply.
- Use a dry or slightly moistened cloth for cleaning
- Never use any chemical or abrasive materials for cleaning.
- The product must be at a minimum distance of 20cm from any
- The product must not be installed into ceilings or wall that
contain heat-insulating materials.
- Turn off main power before wring.
- Remove the ceiling panel
- Connect the input and ground wires(bare end) of the driver box to
the main power outlet.
- Connect male-female connector tightly on the panel and driver.
- Fix the flat led panel into the ceiling.